Operation Manual 12./07 WISI Communications GmbH & Co. KG
SAFETY AND INSTALLATION NOTES PLEASE OBSERVE!
Caution
The mains voltage must match the rated input voltage of the unit (180-265 VAC; 50/60
Hz).
Connecting cable —
Lay the cable so that no- one can trip over it.
— Lay the cable with a downward loop so that any water condensing on it can drip on
the floor instead of running into the unit.
Selecting the installation location
Excessive temperatures will reduce the operating lifetime of the unit. DO not install the
unit directly above or in the vicinity of radiators or heating systems where it would be
subjected to thermal radiation or oil vapours.
Ventilation slots
Do not cover the ventilation slots.
Moisture
Water dripping or splashing onto the unit will damage it. If there is condensation on the
unit, wait until this has evaporated before switching the unit on.
Caution – danger!
In accordance with EN 50 083-1, the antenna system must comply with the safety
requirements with respect to grounding, potential equalisation, etc.
Service work
Service work may be carried out only by qualified personnel. Always disconnect
the power supply voltage before starting any such work.
1 HE
1 HE
OTxx
OTxx
OTxx
Page 2 of 32
