Operation Manual 12./07 WISI Communications GmbH & Co. KG
Of course, you may also mix an access criteria and scrambling state change.
3.21
Deprovision of an existing Scrambling Control Group
Deprovision means, that all services of a Scrambling Control Group will become free-to-air
services. There are several ways to deprovision an existing Scrambling Control Group. One
way is to click the appropriate “clr” link in the SCG list of the “Scrambling Control Group
List” page.
Another way is to edit the Scrambling Control Group as described under “Modifying an
existing Scrambling Control Group”. To deprovision the SCG, you just have to clear all
contents of all access criteria input fields and then click on the “Submit” button. You may
enter an activation time, to schedule the deprovisioning in the future.
After processing the deprovision, the scrambler will remove the Scrambling Control Group
from the list.
3.22 Save&Reboot
If you click on “Save&Reboot” in the menu bar on the left hand side, the scrambler returns
the following page:
To save the current settings into the flash and reboot the scrambler, click on the button named
“Click here to save & reboot”. There will be no reply. the scrambler will start the shutdown
as soon as possible. During the shutdown the settings will be saved into the flash. This may
take about 90 seconds. During this time, the scrambler lights all front panel LEDs red (power
yellow).
Page 26 of 32
