19
SPECIFICATIONS
Model
………………………..GW-1949/GW-1949-W
Height
………………………………………………….... 50”
Width
………………………………………………………24”
Depth
………………………………………………………15”
Weight
………………………………………………131 lbs.
Hopper Capacity
………………………….…….60 lbs.
BTU
(can vary based upon pellet quality and
strength of draft)………………………….19,042
BURN TIMES 40LB BAG
(can vary based upon
pellet quality and strength of draft)...10-31 hrs
HELPFUL HINTS FOR RUNNING YOUR STOVE
When the stove is not in use take the opportunity to inspect and perform any cleaning
or maintenance of the primary burn tube, secondary burn plate and ashtray.
Keep foreign debris out of the hopper.
Starting the draft by letting the hand held torch run for one minute before introducing
pellets is highly recommended. When the stove is cold and it is colder outside than it is
inside, there is a downward draft in the chimney. Running the torch for one minute first
will overcome this downward draft that is present.
This stove was developed using douglas fir pellet fuel.and if available in your area it is
highly recommended.
If smoke becomes present during ignition, reposition the torch head so the flame is
burning across the bottom of the burn basket not directly on it.
Installing the stove pipe straight up is highly recommended. This will ensure a good
upward draft that all wood stoves need to operate. Elbows and horizontal runs restrict
draft.
The secondary burn plate can be slid out up to one inch to provide maximum air flow
during operation.
