Wiseup CK6000, Руководство пользователя

Страница: 6 / 36

1. Camera Lens
2. Blue Indicator Light
3. Yellow Indicator Light
4. Red Indicator Light
5. Mini USB Port
II. What’s In the Box
-1×Car Key Camera
-1×USB/AV Cable
-1×DC5V Charging Adapter
III. Operation
>> Before using, make sure that the camera battery is fully recharged.
>> Please make sure the Micro SD card is securely fitted into the SD card slot on
your camera. The camera will not work without a Micro SD card. A SDHC Class 10
Micro SD card is recommended.
3.1. POWER ON/OFF
3.1.1. Power on the camera by pressing Power On/Off Button for 2 seconds. The
camera will vibrate once. The blue and red indicator lights will illuminate for 3 sec-
onds. Then the blue indicator light will go out and the red one will stay illuminated,
indicating the camera has entered into standby mode.
3.1.2. Power off the camera by pressing Power On/Off Button for 2 seconds. The
camera will vibrate once and the indicator lights will go out.
3.1.3. The camera will shut down automatically if it is in standby mode without any
operation more than 3 minutes.
[Note]:
1). If no micro SD card is fitted into the camera, the blue and red indicator lights will keep flashing for
10 seconds, then the camera will shut down automatically.
2). If the battery is low, the blue indicator light will flash fast and then the camera will shut down auto-
matically.
3.2. VIDEO RECORDING
3.2.1. Power on the camera by pressing Power On/Off Button for 2 seconds. The
camera will vibrate once. The blue and red indicator lights will illuminate for 3 sec-
onds. Then the blue indicator light will go out and the red one will stay illuminated,
indicating the camera has entered into standby mode.
3.2.2. Press Power On/Off Button once to record video. The camera will vibrate once
and the red indicator light will keep flashing slowly.
3.2.3. Press Power On/Off Button once again to stop video recording. The camera
will vibrate once. The red indicator light will stay illuminated, indicating the camera is
back to standby mode.
[Note]:
1). A video file will be generated and saved every 5 minutes automatically.
2). The camera can record video continuously for 1 hour on a full charge.
3). Video Resolution: 1920×1080P Video Format: AVI
3.3. CAMERA/STILL PHOTOGRAPHY
3.3.1. Power on the camera by pressing Power On/Off Button for 2 seconds. The
camera will vibrate once. The blue and red indicator lights will illuminate for 3 sec-
onds. Then the blue indicator light will go out and the red one will stay illuminated,
indicating the camera has entered into standby mode.
3.3.2. Press Mode Button once to enter into photograph mode. The camera will
vibrate once. The red indicator light will go out and the blue one will stay illuminated.
3.3.3. Press Power On/Off Button once to take a photo. The camera will vibrate
once. The blue indicator light will flash once and then stay illuminated, indicating the
camera is back to photograph mode.
3.3.4. Press Mode Button again to switch the modes, or press Power On/Off Button
for 2 seconds to exit the photograph mode and the camera will shut down.
3.4. AUDIO RECORDING
3.4.1. Power on the camera by pressing Power On/Off Button for 2 seconds. The
camera will vibrate once. The blue and red indicator lights will illuminate for 3 sec-
onds. Then the blue indicator light will go out and the red one will stay illuminated.
3.4.2. Press Mode Button twice in a row to enter into audio mode, the red and blue
indicator lights will stay illuminated. Each press will come with a vibration.
3.4.3. Press Power On/Off Button once to record audio. The camera will vibrate once.
The red indicator light will keep flashing slowly and the blue one will stay illuminated.
3.4.4. Press Power On/Off Button once again to stop recording audio. The camera
will vibrate once. The red and blue indicator lights will be stay illuminated, indicating
the camera is back to audio mode.
3.4.5. Press Mode Button again to switch the modes, or press Power On/Off Button
for 2 seconds to exit the photograph mode and the camera will shut down.
[Note]:
1). An audio file will be generated and saved every 20 minutes automatically.
2). Audio Format: WAV
3.5. MOTION DETECTION RECORDING
3.5.1. Power on the camera by pressing Power On/Off Button for 2 seconds. The
camera will vibrate once. The blue and red indicator lights will illuminate for 3
seconds. Then the blue indicator light will go out and the red one will stay illumi-
nated.
3.5.2. Press Mode Button 3 times in a row to enter into motion detection mode.
Each press will come with a vibration.
3.5.3. The camera will record video automatically when a movement is detected. The
red and the blue indicator lights will flash alternately.
3.5.4. Press Mode Button to exit motion detection mode. The camera will vibrate
once. The red indicator light will stay illuminated, indicating the camera is back to
standby mode.
3.6. IR NIGHT VISION MODE
Hold down Night Vision Button for 2 seconds to enter into the night vision mode. The
camera will vibrate twice. The yellow indicator light will stay illuminated and the infra-
red LEDs will be turned on.
Hold down Night Vision Button for 2 seconds to exit the night vision mode. The
camera will vibrate twice. The yellow indicator light will go out and the infrared LEDs
will be turned off.
IV. Resetting
If for any reason, the camera stops responding or isn’t working properly, a quick
reset will restore it back to normal operation.
Operation: Hold down the Mode Button and then press Power On/Off Button once
simultaneously. The camera will vibrate for 3 seconds and shut down automatically,
and the indicator lights will go out.
V. Video/Audio/Image Files Uploads
5.1. Method One: Direct Connection
5.1.1. When the camera is powered off and the Micro SD card fitted into the camera,
connect your camera to a PC computer by using the USB cable provided.
5.1.2. The camera will be recognized as a removable disk drive.
5.1.3. All the files can be accessed in the DCIM folder.
5.2. Method Two: Using Memory Card Reader
5.2.1. When the camera is powered off, remove the Micro SD card and insert it into
a card reader.
5.2.2. Insert the card reader into a PC computer.
5.2.3. Removable disk drive folder appears.
5.2.4. All the files can be accessed in the DCIM folder.
VI. Setting Time/Date Stamp
6.1. When the camera is powered off, remove the Micro SD card and insert it into a
card reader.
6.2. Insert the card reader into a PC computer.
6.3. Removable disk drive folder appears.
6.4. Click on the drive in the root directory and inside the root directory, create a file
“TIMERSET.TXT”.
6.5. Write the current date and time in the “TIMERSET.TXT” file with the correct
format:
YearMonthDayHourMinuteSecond Y (For example: 20160308142432 Y). Save this
file. If you do not need the time stamp on the video files, change Y into N.
6.6. Restart the camera and the system will upgrade the program automatically.
VII. Charging
7.1. Connect the camera to an outlet AC power socket by using the USB cable and
the DC 5V charging adapter provided.
7.2. The red indicator light will keep flashing slowly during the charging process.
7.3. It will take 2 hours to obtain a full charge.
7.4. The red indicator light will stay illuminated when the camera battery is fully
recharged.
VIII. Live Video Output
>> Before using, make sure that the camera battery is fully recharged.
>> Please make sure the Micro SD card is securely fitted into the camera SD card
slot. A SDHC Class 10 Micro SD card is recommended.
8.1. When the camera is powered off, connect it to your TV or monitor by using the
AV cable provided as below:
8.2. Select the camera video signal source on your TV or monitor.
8.3. Power on the camera and start recording video (See 3.2), then you can watch
the camera’s live video on the TV or monitor during the video recording process.
8.4. You can also experience other functions of this camera in the live view mode.