alarm
Alarm setting includes Motion Detection Parameters.
Motion
Configure Sensitivity, Alarm out, Alarm Record and Alarm Capture, etc. Detailed
setting should be consistent with NVR local setting.
exception
User may configure Event Type, Buzzer, Send Email, Show Message and other
parameters. Detailed setting should be consistent with NVR local setting.
network
Unfold <Network> to show its sub-options: Network, DDNS, and Email configuration.
general
NVR supports Static/DHCP/PPPoE modes. System default network type is
<DHCP>. User can set parameters as required. If you change Network type to
PPPoE, NVR will automatically restart to make the setting effective.
ddns
DDNS: After user applies for DDNS service, you could enable <DDNS> function
under any one network type mode (Static, DHCP and PPPoE). And you may
remotely visit the NVR through domain name (http://domain name: HTTP
port No.). When visiting NVR by using DDNS, user should make sure port
and current IP can be normally connected in public network. Details settings,
including server address, host, user, and password, should be consistent with
NVR local setting.
Click on "Test DDNS". If connection succeeds, it will be indicated that "DDNS
Test is Successful!
Web Application Manager
46_
Web Application Manager