background image

English_9

  

INTRODUC

TION

introduction

FEATURES

 

y

High Resolution 

Use of a 2 mega pixel CMOS device provides clear pictures with a resolution of 1945x1097.

 

y

Excellent Sensitivity

<SCD-6025R> 

 Color  :  0.17Lux (F1.6, 1/30 sec) 
B/W  : 0Lux(IR LED on)

<SCO-6025R> 

 Color  :  0.11Lux (F1.6, 1/30 sec) 
B/W  : 0Lux(IR LED on)

 

y

SSNR4 Function 

High performance DSP Chip removes noises of GAIN resulting from the low light level 
and shows a vivid, high definition video even in the dark place.

 

y

Day&Night 

This camera has a function that automatically selects the mode that is appropriate 
for daytime or night-time conditions. The COLOR mode operates in daytime condi-
tions to provide optimum colors, and B/W mode operates in night-time conditions 
to enhance the definition of the image.

 

y

PROFILE 

You can set a mode according to the camera installation conditions. 
-  BASIC, DAYNIGHT, BACKLIGHT, ITS, INDOOR, USER

 

y

DWDR 

By adopting a proprietary high performance DSP chip, the camera delivers clear, 
high quality pictures even in backlight, by increasing exposure in dark areas while 
decreasing it in bright areas; a corrected image with clear details results.

 

y

Miscellaneous Functions 

HLC(High Light Compensation), REVERSE , SHARPNESS and PRIVACY functions are 
provided.

 

y

Communication 

Coaxial communication methods are supported. 
-  Coaxial communication :  ACP(AHD), Pelco-C(CVBS)

Содержание SCD-6025R





































Отзывы: