Wisenet SCD-6025R, Руководство пользователя

Страница: 33 / 36

English_33
●
TROUBLESHOO
TING
y
MOTION :
This product generates signals each time an object movement is detected in the four
areas of the screen so efficient monitoring can be achieved.
➊
If the SPECIAL menu screen is displayed, use the Function Setup switch so that the arrow
indicates ‘MOTION ’.
➋
Select a desired mode using the Function Setup switch.
y
DET. AREA : Set the areas
of motion
detection.
` SEL AREA : Select from 4
areas that users
want.
` MODE : Determine whether
to use the selected area.
` MASK : Under Motion Detection, If you don’t want to see mosaic image on
the screen, you may turn MASK OFF.
If you wants to see mosaic image, please turn it on.
` TRANSPARENCY : Adds or removes transparency from the masking area.
`
TOP/BOTTOM/LEFT/RIGHT : Area location can be adjusted.
`
RETURN : Return to the MOTION DET menu.
y ARM OUT : When object
movement is
detected, the
detection signal
will be outputted.
` OSD : Display signals on the screen.
` RETURN : Return to the MOTION DET menu.
y SENSITIVITY : Set the sensitivity of the motion detection. When you adjust
the higher level, the more sensitive.
y
RETURN : Return to the SPECIAL SETUP menu.
M
`
Depending on the shape of an object, there can be errors in size detection.
`
If the camera shoots an object a short distance away, the motion detection function
can be degraded.
`
In the following cases, motion detection event performance can be degraded or
malfunctions can occur.
MOTION DET
 1. DET. AREA
2. ALARM OUT
3. SENSITIVITY
IIIIIIIIIII
I
IIIIIIIIII 5
4.
RETURN
ALARM OUT
 1.
OSD ON
2. RETURN