38_
troubleshooting
TROUBLESHOOTING
If you have trouble operating your camera, refer to the following table.
If the guidelines do not enable you to solve the problem, contact an authorized technician.
PROBLEM
SOLUTION
Nothing appears on the
screen.
▶
Ensure that your camera is supplied with rated
power as appropriate.
▶
Check that you have properly connected VIDEO
cable to the camera VIDEO output jack.
The image on the screen is
dim.
▶
If the lens is dusty, wipe it out with a clean cloth or
brush.
▶
Set the monitor to proper condition.
▶
If the camera is exposed to too strong light,
change the camera position.
The image on the screen is
dark.
▶
Adjust the contrast feature of the monitor.
▶
If you have an intermediate device, set the 75Ω /
Hi-z properly.
The camera is not working
properly, and the surface of
the camera is hot.
▶
Check that you have properly connected the
camera to an appropriate power source.
The Motion Detection function
does not work.
▶
Check that MOTION DET of INTELLIGENCE menu
is ‘OFF’.
Color is not correct.
▶
Check the setting of WHITE BAL SETUP menu .
The screen flickers continually.
▶
Check that direction of camera turns toward the Sun.
When coaxial communication
is not available:
▶
Make sure that the camera and monitor are
installed within the recommended distance.
▶
Use the video amplifier equivalent to coaxitron
if the recommended installation distance is
exceeded.
troubleshooting
