34_
camera operation
camera operation
y
DIS:
The DIS mode can compensate for
vibration of the camera.
M
`
When DIS is operating, D-ZOOM does not
operate.
y
DEFOG:
You can use the defog mode to allow the camera to automatically
detect the fog density of the screen and display a clear image despite smog,
fog or general poor visibility.
- AUTO : Adjust the level
automatically.
- Manual : Depending on the defog
level set by the user, adjust the
clarity of image.
- OFF : Released state
y
COMM ADJ (Communication Adjustment)
:
This function sets up the camera communication status when controlling the camera
through an external controlled device.
1
When the SPECIAL menu screen is displayed, using the UP or DOWN
button so that the arrow indicates ‘COMM ADJ’.
2
Set up the mode moving the Function
Setup Switch.
- Protocol : Select the communication
PROTOCOL. (SAMSUNG-T,
SAMSUNG-E, Pelco-P,
Pelco-D, Vicon, Panasonic,
Bosch, Honeywell, AD.)
- CAM ID : Determines the camera's
identification number
(between 0 and 255).
- BAUD RATE : You can select 2400/4800/9600/19200/38400/57600/115200 bps.
- UART MODE : You can select NONE, EVEN or ODD for the parity bits.
- RET PKT : You can choose whether to send an ACK signal when the
communication control command is issued to the camera.
SPECIAL SETUP
PRIVACY
DAY/NIGHT
AUTO
DIS
OFF
DEFOG
OFF
COMMUNICATION SETUP
PROTOCOL
SAMSUNG-T
CAM ID
IIIIIIIIIIIIIIIIIIIIII
1
BAUD RATE
9600
UART MODE
8-N-1
RET PKT
ENABLE
COAX
ON
RETURN
DEFOG LEVEL SETUP
LEVEL
IIIII
IIIIIIIIIIIIIIIII
4
RETURN
