34_ camera operation
camera operation
- FONT COLOR : You can change the OSD font color. (White, Yellow, Green, Red, Blue)
- LANGUAGE : You can select the menu language according to your requirements.
- RETURN : Return to the SPECIAL menu.
y
COAX
:
You can select whether to use COAX communication.
y
IMAGE ADJ
❶
If the SPECIAL menu screen is displayed, use the Function Setup switch so that the
arrow indicates ‘IMAGE ADJ’.
❷
Select a desired mode using the
Function Setup switch.
- GAMMA : The setting range is 0.35 ~ 1.0.
The closer to 1.0 the setting is,
the darker it gets.
- PED LEVEL : The setting range is
1 ~ 100. The closer to
100 the setting is, the
higher the PED level
gets.
- COLOR GAIN : The setting range is 1 ~ 100. The smaller the setting value is the
smaller the color gain gets and the more color blind it gets.
- H-REV : Flip an image horizontally.
- V-REV : Flip an image vertically.
- SHARPNESS : Select a mode to adjust the thickness of an image’s sharpness.
Increase or decrease the level of each mode to adjust the level of sharpness.
y
OFF : Released state
y
ON : The setting range is 1 ~ 32.
- RETURN : Return to the SPECIAL menu.
M
`
When the V-REV or H-REV mode is enabled, the text on the screen does not flip.
`
If you increase the SHARPNESS level too high, the picture may become
distorted or noise may appear.
IMAGE SETuP
▶
1.
GAMMA
uSER
2.
PED LEVEL
I
IIIIIIIIIIIIIIIIIIII
5
3.
COLOR GAIN
IIIIIIIIIII
I
IIIIIIIII
50
4. H-REV
OFF
5. V-REV
OFF
6. SHARPNESS
ON
7.
RETuRN
