32_ camera operation
camera operation
y
HLC (High Light Compensation) :
This function masks the strong light to minimize
white out due to over exposure and preserve much
of the on-screen details when the camera aims a
strong light source.
- LEVEL : Adjusts the brightness level of a
monitoring area.
- LIMIT : Enable to change the operating condition.
- TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be
enhanced.
- RETURN : Return to the MAIN SETUP menu.
y
WDR
When there are both bright and dark areas at the same time, this mode makes both
areas distinctive.
- LEVEL : Select one from low, middle,
high to adjust the brightness
of the WDR setup.
- RETURN : Return to the MAIN SETUP menu.
M
`
If the white balance menu is set to manual, then HLC performance can be limited.
`
If you use the defog and HLC functions at the same time, saturation can occur in a
bright environment.
`
Because there can be a difference in the effectiveness of HLC according to the amount
of light area in the screen, optimize the installation angle for the best HLC performance.
`
When dark, the HLC is only activated when a bright light exceeding a specifi c size. (In
NIGHT ONLY mode).
`
The HLC is not activated in day light or when bright light is not present at night. (In
NIGHT ONLY mode).
HLC SETuP
▶
1.
LEVEL
M I D D L E
2.
LIMIT
NIGHT ONLY
3.
TOP
IIII
I
IIIIIIIIIIIIIIII
3
4.
bOTTOM
IIIIIIIIIIIIII
I
IIIIII
7
5
LEFT
IIII
I
IIIIIIIIIIIIIIII
3
6.
RIGHT
IIIIIIIIIIIIII
I
IIIIII
7
7.
RETuRN
<WDR ON>
<WDR OFF>
WDR SETuP
1.
LEVEL
MIDDLE
2.
RETuRN
