Wiseair 201 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 20

Wiseair 201 Скачать руководство пользователя страница 9

User Manual

2021 Release 2

WiseAir Technologies India LLP

[email protected] +91 90477 78715

Page 9 of 20

WADS SERIES

DEW POINT SENSOR

MEASURE TO MANAGE

4.3 Dew Point Sensor - WADS 203 Series

For Desiccant Dryers with dew point of -80°C to +20°C (-112°F to +68°F)

This new generation polymer dew point sensor has auto drift correction

(ADC) technology which ensures industry leading accuracy and consistency of
readings. Precision sensor circuit design automatically compensates the circuit
drift caused by temperature, pollution and ageing, providing long-term reliable
and precise measurement. The dew point sensor is suitable for desiccant and
membrane dryers.

Note: WADS 203 Series dew point sensor is not recommended for

dew points below -60°C (-76°F). This dew point sensor is not
recommended for refrigerant dryers.

4.4 Dew Point Sensor - WADS 204 Series

For Desiccant Dryers with dew point of -110°C to +0°C (-166°F to +32°F)

WADS 204 is The most advanced quartz technology dew point sensor

available. Newly developed moisture sensitive materials provide superior signal
sensitivity  under  ultra-low  humidity  conditions,  and  will  provide  long  term,
stability to measure humidity down to -110°C (-166°F) pressure dew point. The
innovative  temperature  compensation  algorithm  and  multi-point  temperature
compensation calibration greatly improves the sensor's temperature drift and
ensures  high-precision  measurements  over  a  wide  temperature  range.  The
precision sensor design compensates for contamination and ageing, providing
long-term,  reliable,  high-accuracy  measurements.  The  dew  point  sensor  is
suitable for desiccant and membrane dryers.

Note: WADS 204 Series dew point sensor is not recommended for
dew points above -20°C (-4°F). This dew point sensor is not
recommended for refrigerant dryers.

«
...
7
8
9
10
11
...
»

Содержание 201





















Отзывы:

Нет отзывов