background image

10_ introduction

introduction

fEaTurEs

 

y

high resolution 

Use of a 2M pixel CMOS device provides clear pictures with a horizontal resolution of 

1000TVL.

 

y

Excellent sensitivity 

The built-in high sensitivity COLOR CMOS produces a clear image.  

-

   Color :  0.3Lux (F1.2, 50IRE); 0.1Lux (F1.2, 30IRE)

 B/W  : 

 

0.03Lux (F1.2, 50IRE);  0.01Lux (F1.2, 30IRE)

 

y

ssnr4 (samsung super noise reduction) function 

High performance Chip removes noises of GAIN resulting from the low light level and 

shows a vivid, high definition video even in the dark place.

 

y

Day&night 

This camera has a function that automatically selects the mode that is appropriate 

for daytime or night-time conditions. The COLOR mode operates in daytime condi-

tions to provide optimum colors, and B/W mode operates in night-time conditions to 

enhance the definition of the image.

 

y

ProfilE 

You can set a mode according to the camera installation conditions. 

-  BASIC, DAYNIGHT, BACKLIGHT, ITS, INDOOR, USER

 

y

D-WDr 

By adopting a proprietary chip, the camera delivers clear, high quality pictures even 

in backlight, by increasing exposure in dark areas while decreasing it in bright areas; 

a corrected image with clear details results. 

 

y

miscellaneous functions 

HLC(High Light Compensation), REVERSE , SHARPNESS and PRIVACY functions 

are provided.

 

y

Communication 

Coaxial communication methods are supported. 

- Coaxial Communications : ACP(Analog Coaxial Protocol)

 

y

osD 

The camera’s OSD is complimented by 16 languages. 

-  English, Korean, Japanese, German, Italian, French, Spanish, Russian, Czech, 

Polish, Romanian, Serbian, Swedish, Danish, Turkish, Portuguese

                    Available from A1 Security Cameras 

    www.a1securitycameras.com email: [email protected]

Содержание SCD-6013




































Отзывы: