wirsbo proMIX 101, Руководство по установке

Страница: 29 / 56

MIXING INDOOR (MIX INDR) (See fig. f)
1) Go to the MIX INDR item field in the ADJUST Menu
2) Set to the room design temperature used in the heat-loss
calculation
RANGE: 35 to 100°F (2 to 38°C)
DEFAULT: 70°F (21°C)
MIXING DESIGN (MIX DSGN) (See fig. g)
1) Go to the MIX DSGN item field in the ADJUST Menu
2) Set to the design supply water temperature used in the
heat-loss and design calculations
RANGE: 70 to 220°F (21 to 104°C)
DEFAULT: 110°F (43°C)
MIXING MAXIMUM (MIX MAX) (See fig. h)
1) Go to the MIX MAX item field in the ADJUST Menu
2) Set to the maximum supply water temperature used in the
mixing system
RANGE: 80 to 225°F (27 to 107°C)
DEFAULT: 180°F (82°C)
NOTE: Do not exceed the water temperatures
shown for the following construction methods.
MOTOR SPEED (MOTR SPD) (See fig. i)
1) Go to Motor Speed item field in Adjust Menu
2) Set the time the actuating motor requires to operate from
fully closed to fully open
RANGE: 30 to 230 sec
DEFAULT: 150 sec
27
PROGRAMMING
PROGRAMMING - Step 1 - Programming the Control
f
g
h
• Concrete 150°F
• Poured Underlayment 140°F
• Radiant Wall/Ceiling 120°F
(using drywall)
• Joist No Plates 180°F
• Joist w/Plates 165°F
• Quik Trak ® 180°F
i