Wirepath Surveillance WPS-765-DOM-AH, Руководство по установке

Страница: 23 / 32

WPS-765-DOM-AH Installation Manual
23
© 2014 Wirepath Surveillance
6.4.2.13. MOTION DETECTION
With detection turned on, when the camera detects motion, a colored block will
appear on the screen to call attention to the view. Motion configuration allows
for up to 96 zones.
NOTE — It is suggested for most applications to use the motion detection settings
on the DVR rather than the camera. The camera will not initiate recording in the
DVR using this feature.
MOTION DETECTION
DETECT SENSE 50
INTERVAL 50
BLOCK DISP OFF 08
MASK AREA 064
MONITOR AREA 128
RETURN
• DETECT SENSE — Level of sensitivity to changes in contrast within the selected
area.
• INTERVAL — Time delay from the first motion event to the subsequent event.
Motion alerts will not occur within this time delay.
• BLOCK DISP — Generates black or white inverted squares over the area that
motion is detected.
• MASK AREA— Select the portion of the grid you would like for motion to be
masked in. Each number is a grid of 4 blocks for which you can select, for a
total of 96 zones.
• MONITOR AREA—
MONITOR AREA
AREA SEL 1/4
AREA MODE OFF
TOP 10
BOTTOM 10
LEFT 10
RIGHT 10
RETURN
• AREA SEL — Select one of the four areas to modify settings.
• AREA MODE — Toggle monitoring on or off for the area selected.
• Customize the size and the position of each detection zone by adjusting
TOP , BOTTOM, LEFT, and RIGHT values.