Wirepath Surveillance WPS-765-DOM-AH, Руководство по установке

Страница: 19 / 32

WPS-765-DOM-AH Installation Manual
19
© 2014 Wirepath Surveillance
6.4.2.6. DAY/NIGHT Menu
The camera sensor has DAY (color) and NIGHT (black and white) mode. Use this
menu to set the mode and how it is switched.
By default (
AUTO ), the color mode is set based on a light sensor on the front of
the camera, which is recommended for most applications.
Menu Structure and Settings
• DAY— Lock the camera in COLOR (daylight) mode. IR will NOT activate in this
mode, so the ambient lighting level must be sufficient for viewing.
• NIGHT — Lock the camera in B/W (nighttime) mode. Enter the sub-menu to
change advanced settings:
• BURST — Turn ON to provide color video during night-time scenes. It is
recommended in most cases to leave the setting OFF since the amount of
grain and noise in the picture can be too high to see details.
• AUTO — This mode utilizes a sensor on the camera to determine the level of
light hitting the sensor.
• BURST — When On, video signal maintains the color burst signal when
switching to B/W mode. This boosts video signal during times of low light,
though it is recommended in most cases to leave off in order to improve
signal syncing noise problems.
• CNTL SGNL — Select the source for controlling the light mode:
• EXT1 — Use the light sensor to determine the correct light setting.
• EXT2 — Not applicable to this model.
• INT — Use the camera video sensor to determine the correct light setting,
• DELAY CNT — Set the delay time for Day/Night (IR on/off) in seconds.
• DAY→NIGHT— Set delay for switching day (COLOR) to night (B/W) mode. Set
from 0 to 30 seconds. Increase if night mode switches on too quickly.
• NIGHT→DAY— Set delay from Night to Day mode (opposite of above). Set
from 0 to 30 seconds. Increase if day mode switches on too quickly.