Wirepath Surveillance WPS-765-BUL-AH, Руководство по установке

Страница: 9 / 32

WPS-765-BUL-AH Installation Manual
9
© 2014 Wirepath Surveillance
Step 3. Position the Camera
Use the 3mm Allen wrench to loosen and tighten each adjustment screw:
A. Horizontal rotation
B. Swivel left or right
C. Tilt viewing angle
Step 4. Adjust Focus, Zoom, and Menu Settings
See “Camera Operation Setup” beginning on the next page for instructions. Set
the focus and zoom adjustments, and adjust the OSD Setup Menu options as
needed. Disconnect the test adapter after completing adjustments.
Step 5. Close the Camera
Remove the spare silica packet from its sealed foil package (taking care not to
rip the inner packet) and place it inside the test adapter opening.
A
B
C