User Manual
8
4. User Interface
Though the interface display appears simple, there is a lot of information you can read back, which
will help you properly set up your system and help you understand how your devices are operating.
4.1. F-1 and R-512 models
1.
BATTERY
Not used on the BlackBox series.
2.
SIGNAL
Indicates that the Signal status is showing signal strength.
3.
SIGNAL STATUS
On a receiver; indicates the received signal quality. On a transmitter;
indicates the configured output power.
4.
TX
Device is operating as a transmitter.
5.
RX
Device is operating as a receiver.
6.
LINK
On a transmitter; states it’s ready to establish a link.
On a receiver;
•
Off: not linked to any transmitter
•
On: active link from a transmitter
•
Blinking: Linked to a transmitter but link is lost [either the transmitter is out-
of-range or turned off].
7.
DMX
Indicates whether DMX data is present.
8.
MODE
Indicates the radio mode [See chapter 3.4].
9.
RDM
Flashes when there is RDM traffic activity.
10.
PWR
States power condition of the device.
11.
WIFI
Indicate WiFi status;
•
Off: No WiFi installed, or WiFi is disabled
•
On: WiFi is enabled and a protocol configured.
•
Blinking slowly: WiFi is enabled, but no protocol is configured.
•
Blinking rapidly: WiFi is enabled and receiving ArtNet or Streaming ACN
data.
12.
Red function button.
1
2
3
2
1
4
5
6
8
10
7
9
11
12
