User Manual
14
While operating as a TX you can change between modes at any given moment:
1.
Press the red function button rapidly 3 times.
2.
Press and hold the red function button for at least 3 seconds.
3.
Each time you press the red function button you will step through the available modes; this
will be indicated by the
MODE
LED.
4.
Press and hold the red function button to save and exit.
NOTE:
When operating as TX, some modes are not supported.
NOTE:
All changes shall be made to the transmitter. It’s necessary to re-link all receivers after
changing control modes.
6.6. W-DMX™ Configurator app & Bluetooth
All configuration and operation can be performed from the W-DMX™ Configurator app that is
available from App Store on iOS and Google Play on Android.
W-DMX™ Configurator app, search for “W-DMX Configurator” on App Store or Google Play.
6.6.1. Setting PIN code
To avoid unauthorized access to W-DMX™ G6 devices, it is recommended to set a PIN code for your
device. This is done from the W-DMX™ Configurator app.
6.6.2. Reset PIN code
If you have forgotten your PIN code, you can reset it by following the following procedure:
1.
Press the red function button rapidly 7 times.
2.
Press and hold the red function button for at least 3 seconds.
3.
The device will now reboot with the PIN code disabled.
6.6.3. Turning Bluetooth on/off
The
MODE
LED will flash with a blue light every two seconds when Bluetooth is enabled. When
Bluetooth is disabled, no blue flashes will appear on the
MODE
LED.
Bluetooth can be switched on or off at any time:
1.
Press the red function button rapidly 2 times.
2.
Press and hold the red function button for at least 3 seconds.
3.
The device will now reboot with the Bluetooth mode toggled.
