Wired MasonIP, Руководство пользователя

Страница: 26 / 29

Firmware Updates
The Mason has internal software/firmware that controls its operation and func-
tionality. This firmware can be updated
ʻ in the field ʼ .
If Wired releases new firmware for the Mason, or if you want to completely reset
the Mason to its original factory state, follow these steps to update the firmware.
1. First, download the appropriate firmware from the Wired website:
www.wiredinc.com/category/support/firmware/ . There will always be two
variations of each firmware version -
MasonIP_Image - This variation will update your Mason ʼ s firmware, but
leave all your settings intact. This is the one you would normally use.
MasonIP_Image.complete - This variation will also update the firm-
ware, but will completely reset your settings, including any access
password you may have set. Use this one if you need to go back to
factory-fresh settings.
2. Copy the downloaded file to a Windows-formatted USB flash drive.
3. The firmware file must be named exactly this way:
MasonIP_Image
If you downloaded the ʻ complete ʼ firmware file, change its name to ʻ Ma-
sonIP_Image ʼ
4. Plug the USB flash drive into one of the USB ports on the rear of the
Mason.
Mason User Guide Jan 2008 24 of 27