SERVICE MANUAL & ICA
WIPLINE 3730 & 3900 FLOATS
Page 16
Revision K
P/N 1002551
Aft Cradle
Stand
Fore Cradle
Stand
Cradle
Fore
Support
Aft
Support
FIGURE 2-4 FLOAT SECURING LOCATIONS OVERVIEW
(8000A MODEL SHOWN FOR REFERENCE ONLY)
2.9 JACK REMOVAL
Make sure nothing is under or above the airplane or floats when removing the jacks from the aircraft
1.
Turn off fuel.
2. Verify landing gear is in the down and locked position.
3. Verify weighted bags are still located above the nose gear.
4.
Position 1 person at each fore and aft of each float, and 1 person at the jacking location of one float.
5. Remove all fore and aft supports as shown in
Figure 2-3 and Figure 2-4
.
6.
Using modified jack saddle as shown in Figure 2-1, center jack saddle in center of cradle on 1 of the floats,
7.
Lift aircraft to clear fore and aft cradle stands and remove fore and aft cradle stands of lifted float.
8.
Slowly lower float to the ground, remove jack from under float, and remove cradle from jack saddle.
9.
Repeat previous procedure to the other float.
10.
Remove weighted bags from floats.
Содержание Wipline 3730
Страница 28: ...SERVICE MANUAL ICA WIPLINE 3730 3900 FLOATS Page 28 Revision K P N 1002551 THIS PAGE INTENTIONALLY LEFT BLANK ...
Страница 32: ...SERVICE MANUAL ICA WIPLINE 3730 3900 FLOATS Page 32 Revision K P N 1002551 THIS PAGE INTENTIONALLY LEFT BLANK ...
Страница 36: ...SERVICE MANUAL ICA WIPLINE 3730 3900 FLOATS Page 36 Revision K P N 1002551 THIS PAGE INTENTIONALLY LEFT BLANK ...
Страница 46: ...SERVICE MANUAL ICA WIPLINE 3730 3900 FLOATS Page 46 Revision K P N 1002551 THIS PAGE INTENTIONALLY LEFT BLANK ...