background image

SmartPAC 2 User Manual

1126700

SmartView

C-13

Remote Messaging

You can send a remote message from your computer to other press operators by typing the 
message (95 characters maximum, including spaces) in the Remote Message window on the 
Press Status Information Page, and clicking on the 

Send

 Button.  A Status box displays on 

your computer to let you know if the transmission was successful.  Your message will display 
as a post-it note on the SmartPAC 2 to which you have directed it (see Figure C-10, 
page C-14)
.

Once the message is read, it can be cleared by going to the Error/Event Log (click on the Error 
Log link) and pressing the F4 key.  The Error/Event log maintains the status of all messages 
(i.e., Sent or Cleared) by date and time.

Figure C-9. Press Status Information Page

SmartPAC 2 only displays the most recent message.  When another message is sent, SmartPAC 
2 automatically clears the previous message and displays the new one.

NOTICE

Содержание SmartPAC2
































































































































































































































































































































































































Отзывы: