Winters LM3, Инструкция по установке и эксплуатации, Страница: 4 / 10

LM3 Installation, Operation Manual
Tel: 1-800-WINTERS / www.winters.com WINTERS INSTRUMENTS 4
Intended use
- The probes have been developed for continuous level measurement. It is the operator's respon-sibility to check
and verify the suitability of the de-vice for the intended application. If any doubts remain, please contact our
sales department in order to ensure proper usage. Winters Instruments is not liable for any incorrect selections
and their effects!
- Permissible media are gases or liquids, specified in the data sheet. In addition it has to be ensured, that this
medium is compatible with the media wetted parts.
- The technical data listed in the current data sheet are engaging and must be complied with. If the data sheet is
not available, please order or download it from our homepage. (http://www.winters.com)
Y WARNING! Danger through improper usage!
Package contents
Please verify that all listed parts are undamaged included in the delivery and check for consistency specified in your
order:
- probe
- mounting instructions
- with option SIL2 version:
Functional Safety Manual, Functional Safety Data Sheet?, SIL Declaration of Conformity
Product identification
The device can be identified by its manufacturing label. It provides the most important data. By the ordering code
the product can be clearly identified.
! The manufacturing label must not be removed
from the device!
Mechanical installation
Mounting and safety instructions
Y WARNING! Install the device only when depressurized and currentless!
Y WARNING! This device may only be installed by qualified technical personnel who has read and understood
the operating manual!
! Handle this high-sensitive electronic precision measuring device with care, both in packed and unpacked
condition!
! There are no modifications/changes to be made on the device.
! Do not throw the package/device!
! To avoid damaging the diaphragm, remove packaging and protective cap directly before starting assembly. The
delivered protective cap has to be stored!
! Place the protective cap on the pressure port again immediately after disassembling.
! Handle the unprotected diaphragm very carefully - it is very sensitive and may be easily damaged.
! Do not use any force when installing the device to prevent damage of the device and the plant!
Product Code: LM3005
Range: 0...5 PSI
Input: 14...28 VDC
+ Vs: 1 - Vs: 2
Output: 4...20 mA/2-wire
SN 8888888 01.2009
:Case
figure 1