Winterhalter UC-L, Руководство по ремонту

Страница: 29 / 48

27
Procedures
Required material: Kit softener
Item no. 83000420
Item no. 83000421 (Japan)
Tool: Ring wrench 60003376
Important note: The machine must be de-installed
Note for UC-S The procedures also apply for the UC-S.
However, it is not required to de-install the
boiler
Observe the safety notes on page 7
Remove the front panel
Pull the suction pipes out of the chemical containers
Put the suction pipes into a measuring cup with water
Successively activate the dosing devices in the actor programme
in order to rinse them with water
Drain the tank
Switch the machine free of voltage
De-install the machine
Remove the right side panel
Remove the right stiffener wall
Completely drain boiler
Remove the left stiffener wall together with the dosing devices
Pull off the pressure hoses off the dosing devices
Pull off the plug of the dosing devices
Pull off the thermo sensor of the tank
Unplug and de-install the drain pump