Winterhalter GS 600 Series, Руководство по эксплуатации

Страница: 5 / 24

89007105 3
3 Before using the machine
Before you use the machine in your work, it must be connected on your premises by trained specialists in
conformance with locally effective regulations and then set in operation by the Winterhalter customer service.
Do not expose the machine to freezing temperatures. Freezing can damage running water
systems damaged.
3.1 Installation and connection
DANGER! Danger of death due to live components!
Installation and connection of the washer to the customer’s water inlet, waste water
drainage and electricity connections are to be carried out in accordance with national
and local criteria by qualified engineers.
Completeness check:
After unpacking the machine, first check the delivery against the packing slip to see that it is complete and
has suffered no damage during transportation. Inform the haulage company, the insurance company and the
manufacturer immediately of any damages.
Setting up and aligning the machine
Before starting installation, use a spirit level to check that the machine is totally horizontal. Adjust the ma-
chine’s feet to compensate for any unevenness of the floor.
Sanitary installations:
Please observe carefully the information in the attached connection diagram!
Make sure that the water pressure and flow capacity demanded by the connection diagram are
present so that the machine will function properly.
•
Install an easily accessible main shutoff valve in the water supply line near the machine. It may not
be located behind the machine.
•
The machine is DVGW and WRC approved, or designed and built according to DVGW and WRC gui-
delines. It can be connected to the fresh water supply line without any safety device in between.
•
Use the hose and the fine filter in the machine to connect it. The fine filter keeps particles from the wa-
ter supply line from getting into the machine and causing extraneous rust to form on the cutlery or the
machine itself.
•
If water hardness is greater than 6°d, the installation of a water softener is recommended. Now, the
water inlet temperature is max. 50°C.
•
The machine is equipped with a drain pump. The maximum draining capacity is found on the connec-
tion diagram.