Winterhalter Gastronom GmbH Pf. 1152 D-88074 Meckenbeuren OI DuoMatik 2x4 890007574 09/99 sch P.3
5. Installation
The softener is connected to the untreated water inlet before the glass or dishwasher. When connecting please
consider the connection diagram and the indications of the enclosed line drawing.
The softener is tested according to DVGW in connection with a Winterhalter Gastronom dishwashing machine.
Within the scope of DVGW it may be connected with the drinking water supply without intermediate connection of
a particular safety device.
6. Initial Commissioning
The initial commissioning has to be executed according to the "Commissioning Instructions Softener DuoMatik
2x4" by a Winterhalter trained after-sales-service engineer. Therefore please contact this company when the
softener has been installed.
7. Operation
The operation of the softener runs fully automatically after commissioning. Only regenerating salt has to be filled in
from time to time. Please only use unadulterated boiled salt (granulation 8 to 15 mm, or as tablets) which is
marked as regenerating salt for softeners.
Please take care that the regenerating salt in the container always covers the water level (height approx. 150
mm).
8. Maintenance
The function of the softener has to be checked regularly, at least twice a year by the Winterhalter after-sales-
service. If necessary, the inside of the container has to be cleaned.
Protect softener from frost.
Maintenance work is not necessary. The softener may be cleaned on the outside with appropriate plastic cleaning
agents.
9. Special Hints
When operating with hot water, please ensure that the maximum water temperature does not exceed 50°C.
