89005828
3
•
7KH GLVKZDVKHU LV VSODVKSURRI 'R QRW VSUD\ WKH RXWVLGH ZLWK D KLJK
SUHVVXUHRUVWHDPMHWFOHDQHU
•
Check the FI-residual current operated device for functioning regularly accor-
ding to the regulations by pressing the test button.
•
In addition to daily cleaning, we recommend that you have the dishwasher ser-
viced at least twice a year by Winterhalter customer service.
2SHUDWLQJDQGFRQWUROHOHPHQWV
2Q2IIVZLWFK
3UHVV
On/Off switch: dishwasher is switched on.
Indicator lamp in On/Off switch lights up.
3UHVV
On/Off switch: dishwasher is switched off.
Indicator lamp in On/Off switch does not light up.
,QGLFDWRUODPSFDQRQO\OLJKWXSZLWKIXOOWDQN
Indicator lamp illuminated: heating phase of tank.
Indicator lamp extinguished: heating phase completed.
3URJUDPPHVZLWFK
Press programme switch: short programme.
Release programme switch: long programme.
The indicator lamp in the programme switch lights up while the programme is in
progress.
237,21$/)($785(
3XVKEXWWRQVZLWFKIRUGUDLQSXPS
3UHVV
switch: drain pump pumps out tank water (switch lights up)
5HOHDVH
switch: drain pump not in operation (switch does not light up.)
)XQFWLRQLQJRIWKHGLVKZDVKHU
After it is switched on, the dishwasher heats up the boiler. During this heating up phase, the tank is
filled in batches with water and simultaneously heated up. The temperature indicator lamp lights up
after filling of the tank is completed until the pre-set target temperature is reached. Then the indicator
lamp goes out. It lights up repeatedly during the heating phases of the tank.
Once the tank has been filled completely, a wash cycle is started automatically to signal readiness for
operation.
The dishwasher is fitted with an automatic hood start. When closing the hood, slight pressure has to
be applied to overcome the hood catch position. The pre-set programme starts as soon as the lid has
been closed.
The container for rinse additive is installed separately from the dishwasher. Dosage for the rinse addi-
tive is controlled automatically by the dishwasher.
