Wintec LP-4502+, Руководство пользователя

Страница: 9 / 23

4
- When the signal is received, pressing [SET] or [CH] will
stop scanning and stay in the current channel.
- When scanning and none of the signal is received,
pressing [PTT] will talk to the original channel, release [PTT]
will continue to scan after 5 sec.
- When the signal is received, pressing [PTT] will talk to the
current channel, and stop scanning and stay in the current
channel.
*VOX is invalid, when scan in progress.
*This operation is not allowed at the Memory channel / SOS
channel.
CTCSS / DCS Setting
1. Press [CTS] once to entry the CTCSS / DCS Sub-Tone
code setting mode.
2. In the CTCSS / DCS Sub-Tone code setting mode, the
LCD will show original Sub-Tone code (-- -- / Ctxx / dC xx),
then press [
▲ ] or [ ▼ ] to select the new Sub-Tone code that
you wanted. After finished selecting, press [CTS], [PTT],
[SET] or [CH] once to jump out of the Sub-Tone code setting
mode and save your setting.
Sub-Tone code setting mode indication:
- OFF: If the current channel not setting CTCSS / DCS, the
LCD will show “-- --”.
- CTCSS: LCD will show Ct01~51, detailed like CTCSS
code table.
- DCS: LCD will show dC:01~83, detailed like DCS code
table.
*The Sub-Tone code for transmitting and receiving is the
same.