Wintec LP-4502+, Руководство пользователя

Страница: 16 / 23

11
Memory Channel and SOS Channel Setting
1. Select favorite channel and CTSS / DCS.
2. Hold [CH] and [SET] until the LCD starts flashing
indicating that you have entered the Memory / SOS channel
setting mode, and you can release [CH] and [SET].
3. You can select the Memory channel ( flashing) or the
SOS channel ( flashing) by pressing [
▲ ] or [ ▼ ] in the
Memory channel and SOS channel setting mode. After
selecting, press [SET] to set the Memory channel or SOS
channel, and exit setting mode.
4. In the Memory channel and SOS channel setting mode,
press [CH] or [PTT] or [CTS] briefly to exit the setting mode,
but not save any setting.
Low Battery Power Warning
1. When the battery level is low, the icon flashes, a beep
warning is issued every minute, and a beep warning is
issued at the beginning of the transmission.
2. When the battery is seriously low, the icon flashes, two
beeps per minute, and two beeps at the beginning of the
transmission.
3. When the battery is exhausted, the unit will shut down
automatically
.
Restore to Factory Default Settings
1. Turn power OFF.
2. Hold [SET] and press until you hear 3 beep sounds
and then release all button.
3. The factory default settings will restore.