Wintec LP-4502+, Руководство пользователя

Страница: 13 / 23

8
Factory default: Level 3
F10
Repeater ON / OFF
The function is not in use for PMR type.
*F10 does not appear on the PMR type device.
F11
End of Call Confirmation ON / OFF
Under menu item 11, when the function is on, each time the
Call is finished, the unit will send a tone to confirm the end
of the call.
Factory default: OFF
F12
Busy Tone Lockout (BTL) ON / OFF
Under menu item 12, BTL ON / OFF can be selected.
When the function is on, if the signal matching CTCSS /
DCS is receiving, TX is forbidden for fear of interrupting the
occupied busy channel. If you want to transmission (PTT /
Vox) at this time, the machine will issue a warning beep and
display "btL" on the LCD to remind the channel is busy.
Factory default: OFF
F13
Scrambler Setting
Under menu item 13, the radio sets off / 1-9 codes of
scrambler to measure a radio signal securely. It can only
understand by someone who has special group at the same
code. You can’t communicate clearly with different
scrambler code settings.
Factory default: OFF
Tone Call
Holding [PTT], temporarily press [CTS] to send tone call to
other receivers. (For selection of tone call, refer to F1.)