Wintal PVR-X2, Руководство пользователя, Страница: 22 / 44

22
3. Installation
3.1 Auto Search
Select this feature to complete an automatic scan, finding all available
channels and storing them in memory. This is sometimes necessary if you
move house or new channels are established.
While running Auto Search , the system
begins to search programs using a preset
channel plan. As DVB-T channels are found,
the program search results are displayed. A
bar at the bottom of the window reflects the
signal quality of each frequency as it scans.
When the search is completed, the TV and
Radio programs found will be added to the program list and arranged under
categories.
3.2 Manual search (for advanced users)
Only Use Manual Search if you are familiar with the relevant parameters.
In Manual Search mode, only one RF channel
is added at a time.
Channel NO: Press to select with
channel you wish to search for. Frequency
(KHz): This value varies the according to the
Channel no. being tuned, however, it can also
be adjusted using the numeric keys.
Band Width: Select 7MHz, 8MHz or 6MHz.
NIT : By pressing keys, you can switch NIT ON or OFF.
LCN (Logical Channel Numbering): By pressing keys, you can switch
LCN ON or OFF. If LCN is ON, then all the channels will be listed according
to their logical channel number.