－
01
－
－
02
－
button
3.2.
Button function instruction:
VEL
：
Sound speed adjustment button
UP
：
Switch button of selection\Adjustment
/
MENU
：
Power On\Shutdown\Menu
ESC
：
Exit button
DOWN
：
Switch button of selection\Adjustment
OK
：
Confirmation button
MENU
OK
VEL
UP
ESC
DOWN
3
、
Part name and display instruction
3.1. Part name
Transmission
socket
Battery compartment
(back of body)
Receiving socket
Probe
MENU
OK
VEL
UP
ESC
DOWN
Ultrasonic Thickness Gauge
Calibration sample
Color screen
Button
Body
1
Introduction
、
2
、
Attention
The intelligent and hand-held ultrasonic thickness gauge is
controlled by a microprocessor, which can measure thickness
and sound speed of various materials quickly, accurately and
without damage by ultrasonic measurement. This instrument is
capable of accurate measurement for different materials or
parts in industrial production, as well as monitoring pipelines
and pressure vessels of production equipment, and corrosion
degree of various parts in use. It can also be widely used in
manufacturing, metal processing, commodity inspection and
other testing areas. Any material that allows ultrasonic to
transmit at a constant speed and that is distinguishable from
waves reflected from the back side is applicable to this
instrument.
1.1. Application scope
The thickness of any good conductor for ultrasonic waves
with top and bottom surfaces parallel to each other, like metal,
plastic, ceramic and glass, can be measured with the instrument.
For example: aluminum, copper, gold, resin, water, glycerin, etc.
The internal particles of cast iron are too big for this instrument!
2.1. This gauge is equipped with Ni-MH rechargeable batteries.
Please do not install non-rechargeable batteries.
2.2. Please keep the instrument away from flammable or
explosive environment.
2.3. Please keep the instrument away from dangerous voltage in
ase of accidents.
2.4. Please keep the instrument away from strong impact, high
temperature and water immersion.
2.5. Batteries should be taken out if not in use for a long time.
2.6. Please install batteries in correct direction. Please charge or
replace batteries when the power is low.
2.7. Please do not disassemble the instrument or try to change
internal parts.
2.8. Alcohol and diluents are corrosive to case and screen, which
can be cleaned with a little water.
