SYS-ITX-N-3900/Configuration
v1.0
www.winsystems.com
Page 12
7.5
Reset CMOS BIOS Configuration
Jumpers can be used to reset the BIOS CMOS settings to the factory
default. Enable or disable the Clear CMOS Function hardware circuit, by
placing or removing the jumper from JP3 as needed. See “Reset CMOS
BIOS Configuration” on page 48 for usage.
8.
Configuration
This section describes the SYS-ITX-N-3900 components and configuration.
8.1
Component Layout
8.1.1 Rear Panel Connectors
Rear panel connectors provide common external connections.
The following table provides connector descriptions and references for
the rear panel, illustrated in the figure above.
Item
Type
Description
Reference
J1
Connector
DC Jack
J2
Connector
Audio Jack (Line_out)
J3
Connector
DisplayPort
J4/J5
Connector
RJ45 Connector
J6
Connector
USB 3.1 Gen 1 Connector
J9
Connector
VGA Connector
J10
Connector
RS232/422/485 Connector
SW1
Switch
Power Switch
SW1
J2
J4/J5
J3
J10
J9
J6
J1