SYS-ITX-N-3900/BIOS Settings
v1.0
www.winsystems.com
Page 33
SATA Device Type:
Identify whether the SATA port is connected to a hard
disk drive or a solid state drive. Choices: Hard Disk Drive (Default), Solid
State Drive
USB Configuration
Use this screen to set the USB configuration parameters.
SoC USB Configuration
USB Port Disable Override:
Selectively enable/disable the corresponding
USB port from reporting a device connection to the controller. Choices:
Disable (Default), Enable
USB Port Disable Override [Enable]
USB Port #0-3:
Enable/disable the USB port. When disabled, any USB
devices plugged into the connector is not detected by BIOS or OS. Choices:
Enable (Default), Disabled
USB 3 Port #0-3:
Enable/disable the USB port. When disabled, any USB
devices plugged into the connector is not detected by BIOS or OS. Choices:
Enable (Default), Disabled
Common USB Configuration
Legacy USB Support:
Enables legacy USB support. Auto: Disable legacy
support if no USB devices are connected. Disable: Keep USB device