WinSystems PPM-GX500 Скачать руководство пользователя страница 14

Страница: 14 / 50

080505

OPERATIONS MANUAL PPM-GX500

Four independent, full-duplex, RS-232 asynchronous serial channels are on-board.

Interface is provided at connector

, which is an 80-pin high-density connector.

WinSystems offers the cable

CBL-251-1

to simplify the connection. The pinouts

for the connector and cable are listed on the following page, as well as connector

variations for RS-232, RS-422 and RS-485.

All serial channels are configured as Data Terminal Equipment (DTE). Both the send

and receive registers of each channel have a 16-byte FIFO. All serial ports have

16C550-compatible UARTs that offer software compatibility with PC-type driver

programs.

Serial Interface

Visual

Index

Optionally, a USB FLASH drive can be connected in addition to, or instead of the

CompactFlash device. Legacy USB operation is supported by the system BIOS.

Selecting the option

CD-ROM Drive

from the BIOS boot order configuration also

enables boot from a USB device. If a CD-ROM device is already present, the

system will attempt boot from the CD-ROM before attempting boot from a USB

device.

1 o o 2
3 o o 4
5 o o 6
7 o o 8

J105 CFLASH

7-8 CFLASH Master
7 8 CFLASH Slave

Solid State Disk (SSD) Support

The PPM-GX500 supports solid state CompactFlash storage devices for applications

where the environment is too harsh for mechanical hard disks or floppy drives.

The CompactFlash socket at

supports modules with TrueIDE support.

WinSystems offers industrial grade CompactFlash modules that provide high

performance and extended temperature operation (-40ºC to +85ºC). A red IDE

activity LED is present at

When using a CompactFlash device, Master/Slave selection is made using jumper

field

J105,

located on the back of the board.

Visual

Index

Rotational Disk Support

An industry standard 16-bit IDE interface is provided to support up to two hard

disks. A status LED,

, provides visual status during IDE data transfers. Note

that the CompactFlash is an IDE device. Use of a CompactFlash device therefore

reduces the number of available hard disks to one. Up to two, 3.5” floppy disk

drives are also supported. The IDE and floppy interface is provided via connector

J109

, which is an 80-pin high density connector. WinSystems offers the cable

CBL-252-1

to simplify the connection. The pinout for the connector and cable is

listed in detail in the

cable drawing

Visual

Index

Содержание PPM-GX500



















































Результаты поиска

Содержание PPM-GX500

Отзывы:

Похожие инструкции для PPM-GX500

Бренды по названию

Популярные бренды

WinSystems PPM-GX500, Руководство по эксплуатации

Результаты поиска

Содержание PPM-GX500

Отзывы:

Похожие инструкции для PPM-GX500

Бренды по названию

Популярные бренды