WinSystems PPM-GX500 Скачать руководство пользователя страница 10

Страница: 10 / 50

080505

OPERATIONS MANUAL PPM-GX500

Software Developers Kit

-WinSystems offers software developers kits to provide the necessary

hardware, software and cables to aid program development with the PPM-GX500 board. The

configuration consists of an operating system, DVD-ROM drive, a hard disk, a 3.5” floppy disk, plus

required cables and triple output power supply housed in an enclosure. This packaging permits

easy access to the board, PC/104 modules and peripherals during program development.

The PPM-GX500 is an x86-compatible SBC. It is designed to run both 16-bit and 32-bit x86

instruction set software and is compatible with Microsoft’s Windows CE and XP Embedded (XPe)

operating systems as well as the applications that run on them. It also supports Linux, DOS

and many other PC-compatible x86 operating systems such as QNX, VxWorks or other real-time

executives that require a PC hardware environment.

Software Support

The PPM-GX500 is an AMD Geode [email protected], PC/104-

Plus

single board computer

(SBC). AMD Geode processors have extremely low power dissipation which allows fanless

operation.

The board accepts up to 512 MB of PC2700 DDR SDRAM. Also, a 10/100 Ethernet controller,

video with CRT and flat panel interfaces, four serial COM channels, AC97 audio, and the

standard AT peripheral feature set are included. It supports two floppy disk drives and two

Ultra DMA 33/66 IDE drives. Additionally, the PPM-GX500 has two USB 1.1 channels that

support USB keyboard, mouse, floppy and storage devices. Legacy USB operation is supported

by the system BIOS. Booting from a USB port is supported.

The PPM-GX500 measures 3.60” x 3.80” (90 mm x 96 mm). It offers additional I/O expansion

with PC/104 and PC/104-

Plus

connectors.

There is a socket for bootable Type I and II CompactFlash cards. A connector is included to

support a remote GPS receiver.

The board will operate from -40°C to +85°C , without requiring a fan, for rugged embedded

applications. It is ideal for low-power, high-performance, battery powered and portable

applications.

Содержание PPM-GX500



















































Результаты поиска

Содержание PPM-GX500

Отзывы:

Похожие инструкции для PPM-GX500

Бренды по названию

Популярные бренды

WinSystems PPM-GX500, Руководство по эксплуатации

Результаты поиска

Содержание PPM-GX500

Отзывы:

Похожие инструкции для PPM-GX500

Бренды по названию

Популярные бренды