12
a. Press “Menu”
b. Go to “Pair Camera” and select “Camera 2”
c. Press “Parking Aid line” to confirm
d. The unit is now in pair mode - if the monitor is able to connect with the Camera, the display will
show “Pair OK”.
If no camera is found, then the display will show “Pair Fail”. If you receive a “Pair Fail” message, please call
our technical support to assist in troubleshooting.
SET DEFAULT CAMERA
• The Backup Camera that is included in this System is set as the Default Camera (Camera 1). When
installed as directed by powering through the rear taillights, the rearview image will automatically
appear on the screen during reverse and will remain in standby when the vehicle is in any other
gear or driving forward. If the Camera is powered from another 12V/24V source it will be constantly
powered instead of only when in reverse gear.
• In addition to the Backup Camera, this System can pair with ONE Type S Add-On Camera. The Type S
Add-On Camera would be designated Camera 2 when paired to the system.
