Winplus Cocoon Create Model Maker HE170703, Инструкция по эксплуатации

Страница: 19 / 40

19
AFTER SALES SUPPORT
1300 663 907 CUSTOMERCARE@WINPLUS.COM.AU MODEL: HE170703
PRINTING AND REMOVING MODELS
5.1.1 During Printing
Closely monitor the first layer being printed. Most problems, like poor adhesion and
warping, will occur in the first layer. If problems occur, stop the 3D printer in the menu or
power off the printer. Some other important tips:
• Do not leave the 3D Printer unattended while in operation
• Keep hands clear while machine is operating
• If your model is not sticking to the bed, reference page 32 to troubleshoot bed adhesion issues.
• While printing some settings can be modified. Push the dial button to access these settings:
1. Speed %: Turn the dial to adjust the print speed %. Note the original print speed is
determined by GCODE file generated, not the printer
2. Nozzle: Modify the temperature of the nozzle
3. Pause print: Pauses the print once the last instruction GCODE instruction has completed (be
patient). Tap resume print to keep printing
4. Stop print: Stops the current print
NOTE:
If you change the print speed, you may need to change the nozzle temperature
5.2 Print Times and Filament Usage
Print times and the amount of filament used per print will vary depending on many factors. Here
is an example of how size, infill, and resolution can affect printing time and filament usage. See
“Useful Terms” on page 34 for more information.
Dimensions:
62.5 x 25.75 x 67.75mm 70 x 70 x 140mm
Infill:
20% 0% 20% 20%
Resolution:
2mm 2mm 2mm 1mm
Print Time:
53min 39min 6hr 40min 13hr 12min
Filament Used:
4m 2.54m 45m 45.67m