SECTION 7 –
PLUMBING
7-14
3. Let the ice maker run through a cycle, then
raise the shut-off arm.
4. Be sure water has drained from ice maker
supply line, then reconnect to inlet valve.
5. Ice maker is now winterized.
To use Ice Maker again:
Flush antifreeze from the waterlines, then
1. Close all drain valves.
2. Turn the water supply on.
3. Be sure the ice bin is in place and the
automatic shut-off arm is down.
4. Let the refrigerator cool down to ice making
temperature. Remember, this can take up to 24
hours.
5. Let the ice maker cycle and dump the first
batch of ice.
Ice Maker Water Supply Connection
-Typical View
WATER SYSTEM DRAIN VALVE LOCATIONS
Model
System
Drain Valve Locations
35J
Waterlines
•
Open exterior shower faucet and lay shower head on
ground.
Also, place the tip of your finger inside the city water
connection and gently press the backflow valve (small
“button” in center of connector) to drain any water left
in the city waterline.
Water Tank
•
Large yellow-handled valve beneath bed. Raise
mattress to access.
Water Heater
•
Drain plug on outside of coach behind service door.
Use socket to remove drain plug.
Water Heater
Bypass Valve
•
Beneath refrigerator. Remove lower front panel to
access.
Winterization
(Antifreeze) Valve
•
Beneath bed. Raise mattress to access.
