![background image](http://html1.mh-extra.com/html/winnebago/sightseer-30a/sightseer-30a_operators-manual_987511031.webp)
3-7
SECTION 3 –
DRIVING YOUR MOTOR HOME
Mirror Heaters
The mirrors may also contain heating
elements to de-fog or de-ice the mirror glass
during cold weather operation. An ON-OFF
switch for the mirror heaters is located near the
remote mirror controls.
Mirror Arm/Head Adjustment
If you cannot adjust a mirror properly using
the control switch, the mirror may need a coarse
adjustment by rotating the mirror head.
NOTE: Set screws may be located on the
opposite side of the mirror arm.
Passenger side mirror is similar.
BRAKE-SHIFT INTERLOCK
Ford
®
Chassis
The Brake-Shift Interlock is a safety feature
that prevents the shift lever from being moved
from the Park position unless the ignition is ON
and the service brake pedal is pressed.
NOTE: If the brake light fuse is blown, the
interlock feature will not work properly
and an alternate method must be used.
See the chassis manual provided in your
InfoCase for detailed instructions on
what to do in this situation.
PARK BRAKE – FOOT PEDAL
Ford
®
Chassis
The park brake foot pedal and release lever are
located beneath the left side of the dash.
Step the pedal down fully to apply and pull the
brake release knob to disengage.
Move Selector Switch L or R to select mirror.
Center “neutral” position disables arrows
to avoid unintentionally moving a mirror
Press Arrow Buttons to move
mirror surface in direction indicated
Mirror Heat Switch
(Located on driver side trim panel)
-Typical View
Mirror Head Pivot Lock
Loosen Allen head set screw
to pivot mirror head.*
(Torque 75-100 in/lbs)