SECTION 7 –
PLUMBING
7-16
• Install the diverter plug into the filter socket.
Insert plug up into the filter socket as far as
possible and twist “clockwise” one-quarter
turn until it stops.
Set Up Winterization Valves
2. Turn the Water Heater Bypass valve to
BYPASS position to avoid filling water heater
with antifreeze.
.
3. Remove and save the protective cap from the
end of the antifreeze siphon tube. Insert the
end of the siphon tube into a pail or other
container with 2 to 3 gallons of non-toxic RV
antifreeze solution.
(See “Water System Drain Valve Locations”
chart at the end of this section for location on
your model).
4. Turn the Winterization valve handle so it
points toward the antifreeze siphon tube. This
will allow the siphon tube to draw non-toxic
RV antifreeze into the waterlines.
(See “Water System Drain Valve Locations”
chart at the end of this section for location on
y our model).
Water Heater Bypass Valve
• Model 25T - Located behind removable
access panel in driver side rear compartment
• Model 25R - Located under wardrobe cabinet
behind flip-down door
• Model 25Q - Behind removable access panel
under wardrobe cabinet
-Typical View
Antifreeze Siphon Tube
-Typical View
• See the “Water System Drain Valve Locations”
chart at the end of this section for specific location
on your model.
Winterization Valve
-Typical View
• See the “Water System Drain Valve Locations”
chart at the end of this section for specific location
on your model.
