SECTION 3 –
DRIVING YOUR MOTORHOME
3-8
6. When tire pressure testing is complete,
reinstall the valve stem cap (with the cap still
retained in the hose extension end).
7. Remove hose extension from valve stem cap.
Rear Inner Dual Valve Stem Access
on 18-Hole Steel Wheel with Push-
On Full Wheel Trim or Stylized
Chrome Wheels
–If Equipped
1. Obtain a double angle push/pull truck tire
gauge.
2. Locate the 6” hose extension (provided in
your InfoCase).
3. Push the end of the hose extension onto the
rear inner dual valve stem cap.
4. Using the hose extension as a remote handle,
unscrew the valve stem cap (retaining cap in
the end of the hose extension).
NOTE: If the valve stem cap and valve stem
extension unscrew as an assembly, pull
the assembly out of the hose extension
Inner
rear
dual
Hose
extension
18-Hole Steel Wheel with Push-On Full
Wheel Trim
Stylized Chrome Wheels
