3-17
SECTION 3 –
DRIVING YOUR MOTORHOME
Vertical Access Cover
5.
For Model 34T.
The Vertical Access Cover is
visible to the rear of the forward engine access
cover.
Proceed to step 6.
For Models 36H, 38F, and 38W.
Remove
Access Panel on rear wardrobe face (Model
36G) or rear lavatory cabinet face (Models
38F and 38W) by first removing the wooden
screw plugs, then removing the screws from
the panel and set aside.
NOTE: On some models, the access panel is held
on with spot nails. The panel must be
carefully pried off so it will not be
damaged. On other models, the panel is
held on by screws located on each end of
the panel.
6. To Remove the Vertical Access Panel,
remove the screws from the panel and set
aside.
Engine Cover Support Angle
*Model 38F shown
Access Panel
(Located on rear wardrobe face)
*Model 36H shown
Screws
and
Plugs
Access Panel
(Located on rear lavatory cabinet face)
*Model 38F shown
Screws
Vertical Access Panel
*Model 38F shown
