![background image](http://html1.mh-extra.com/html/winnebago/adventurer-27n/adventurer-27n_manual_987464075.webp)
6-9
SECTION 6 -
ELECTRICAL
Generator Operation
See the manufacturer’s operation, care and
maintenance in your InfoCase.
Generator Hourmeter
This meter is located on the monitor panel. It
registers the total number of hours that the
generator has been operated.
Your motorhome is equipped with one of the
following Systems Monitor Panels shown below.
Refer to the hourmeter to determine when
periodic maintenance is due and to record
services which have been performed.
Automatic Generator Start (AGS)
–If Equipped
The Automatic Generator Start feature
monitors house battery voltage and motorhome
interior temperature, and has the ability to
automatically start the Generator to help
maintain full air conditioning function and house
battery charge.
The AGS control pad is also equipped with an
hourmeter feature, which registers the total
number of hours that the generator has been
operated.
Generator Operation
(if equipped with AGS)
To Start the Generator
Press and Hold the “Start/Preheat” button on
the AGS Control Pad until you hear the
Generator running smoothly, then release.
To Stop the Generator
Press and Hold the “Stop/Prime” button on the
AGS Control Pad until you hear the Generator
come to a full stop, then release.
Automatic Power Transfer Box
(Located inside or behind
utility compartment)
-Typical installation shown
AGS Control Pad
(Located near monitor panel)