![background image](http://html1.mh-extra.com/html/winnebago/2014-sightseer/2014-sightseer_operators-manual_987455031.webp)
3-5
SECTION 3 –
DRIVING YOUR MOTORHOME
•
To store, push Workstation in until it “clicks”
into secured position.
KEYONE
™
LOCK SYSTEM
-If Equipped
Your coach is equipped with the KeyOne lock
system. A single key will open every door lock in
the entire vehicle (except the ignition and
security deadbolt lock on the entrance door).
The key number for your coach is registered in
our factory database, so if you ever lose your
keys, any Winnebago Industries
®
dealership can
order a new key for you.
RADIO IN-DASH/REARVIEW
MONITOR SYSTEM
–If Equipped
The radio in your coach can receive AM/FM
stereo stations. It also has a CD/DVD player for
your listening enjoyment through quality high-
output speakers located in several areas of the
coach.
This system is also featured with a rearview
camera monitor system, which lets you see what
is directly behind your coach for safety and
maneuvering assistance. The viewing screen is
integrated into the dash.
The radio screen switches automatically when
the transmission is shifted into reverse.
NOTE:The camera polarity setting needs to be
set to “Battery” for automatic camera
viewing when the vehicle is put into
reverse. This can be set by pushing the
HOME button, select SYSTEM under
settings, and scroll down to “Camera
Polarity” and pushing the menu until it
reads “Battery”. This will need to be
reset every time the power is
disconnected from the radio.
Basic Operating Instructions
•
1 - RESET
- Press to reset the microprocessor.
•
3 - +/- (Volume) -
Press to set the volume.
•
4 - MUTE
- Press to mute audio.
•
5 - HOME -
Press to switch the display.
•
6 - MODE
- Turns the information display off.
•
7 -
TRK
- Press for manual tuning.
Press and hold for seek tuning.
•
8 - EJECT
- Press to eject the CD/DVD
•
10 - DISC LOADING SLOT
Sideview Cameras
The sideview cameras (built into the driver
and passenger side mirrors) activate with the
corresponding turn signals and replace the rear
•
Grasp center lower edge
of Workstation to extend