Winnebago 2004 Chalet, Руководство пользователя

Страница: 98 / 120

SECTION 8
APPLIANCES & INTERIOR FEATURES
8-16
3. Add odor control chemical in amount speci-
fied after cleaning and every few days during
use.
4. Remove the water line from the base of the
toilet and clean the screen.
5. If the flush valve becomes stiff after
extended use, it may be lubricated with a sil-
icone spray.Turn the water pump off and
operate flush pedal to drain water from the
toilet bowl. Spray silicone lubricant onto
flush valve inside bowl and operate flush
pedal a few times to ensure free operation.
See instructions in Section 10 to prepare the
toilet for storage in freezing conditions.
POWER ROOF VENT - Bath Area
Some models are optionally equipped with a
powered roof vent in the bath area. A push button
switch for the vent fan is located up on the vent.
The vent dome can be raised and lowered using
the crank handle.
SLIDER WINDOWS
Lift the latch handle straight out from the win-
dow. Grasp the sliding window edge frame and
slide the window to the side. Be sure the latch is
raised before trying to slide the window closed.
DAY/NIGHTER PLEATED BLINDS
Your coach may feature two-stage pleated
window blinds that can be used for daytime or
nighttime privacy.
Sun Filter: The first, lower section is a trans-
lucent white shade that can be lowered for priva-
cy without darkening the inside of the coach. It
can also filter out harsh direct sunlight to help
keep the inside of the coach cool in summer or to
disperse light for houseplants.
Room Darkening/Privacy Shade:
The sec-
ond, upper section is an opaque, darkening shade
for nighttime privacy and daytime room darken-
ing purposes. Pull both the first and second sec-
tions down together or separately.
Tension Adjustment:
The tension of the pleated blinds can be ad-
justed if they become loose and will not stay up
when raised, or they are too tight and are difficult
to raise and lower.
To tighten the tension , simply wrap the lower
end of the guide cords (on each side of the shade)
a few turns around the spools at the lower corners
of the blinds.
To loosen the tension , unwrap the guide cords
from the spools one turn at a time until desired
tension is achieved.
Preserving Shape:
The pleated blinds are made using high quali-
ty materials that are designed and woven to retain
their shape throughout their useful life. They may
lose their crisp shape, however, if left in a low-
ered position for an extended period of time with-
out being raised periodically. If this happens, the
pleats can be restored using this simple method.
·
With the blind fully lowered, dampen the en-
tire area of the with a good quality laundry
sizing spray.
·
Raise the blind fully while still damp and let
it remain in the raised position for about 24
hours, until the sizing has dried and “set”.
·
Reapply sizing periodically (every few
months) as needed.
We recommend that you fully raise pleated
blinds when they are not needed, especially in
warm environments, to prevent them from losing
their shape.