19
1) Grasp the back rest with one hand.
2) With the other hand, activate one of the two handles on the back rest while
lowering.
If the handle is released, the back rest will stop moving.
.
To reactivate the cardiopulmonary resuscitation system of high-load beds
(270Kg), actuate the backrest electric actuator to its minimum position by pressing the
down button on the remote control.
7.1.3. Emergency release of the back rest (Cardio Pulmonary Resuscitation)
7.2. Leg rest
7.2.1. Leg rest with manual crank (C)
To lift, lift the leg rest using the handle at the end.
To lower, relieve the leg rest slightly or to its maximum with the hand to release the catch, then lower the leg
rest.
7.2.2. Leg rest with electric folding (P)
Memory folding: This function keeps a position of the tibia section horizontal when the jack is activated
upwards. To use this function, the 1st crank catch must be engaged when the leg rest is flat.
Folding without memory : the end of the tibia section stays in contact with the bed base.
8. INSTALLATION OF ACCESSORIES
8.1. Boards
➢
Installing a bed board :
Release handles
O K
