Winmate R17IK3S-RKA1ML, Руководство пользователя

Страница: 19 / 76

19
Chapter 2: Installation
Connector Pinouts:
2.3.2 Connecting to DC Input Power Source (Optional)
DC Power Input Requirements: 9~36V DC.
1. Insert the exposed wires of the DC Power Cable to the appropriate connectors on the terminal
block plug.
2. Plug the terminal block plug firmly to the DC IN Jack.
3. Connect the other end of the DC power cable (wires with lug terminals that are labeled
+ and
–
to the terminals of the 9-36V DC Power Source). Ensure that the power connections
maintain the proper polarity.
Warning!/ Avertissement!
Make sure that the polarization of the power lines is correct and complete
including earth ground.
Assurez-vous que la polarisation des lignes électriques est correcte et complète, y
compris la terre.
Pin №
Signal Name
A VCC+
B VCC-
C GND