User Manual
Chapter 5
BIOS Setup
M-Series HMI
69
5.3 Using Recovery Wizard to Restore Computer
Note:
Before starting the recovery process, make sure to backup all user data.
The data will be lost after the recovery process.
To enable quick one-key recovery procedure:
Plug-in the AC adapter to Bay Trail series computer. Make sure the computer
stays plugged in to power source during the recovery process.
Turn on the computer, and when the boot screen shows up, press the
F6
to
initiate the Recovery Wizard.
The following screen shows the Recovery Wizard. Click
Recovery
button to
continue.
A warning message about data loss will show up. Make sure the data is backed up
before recovery, and click
Yes
to continue.
Wait the recovery process to complete. During the recovery process, a command
prompt will show up to indicate the percent of recovery process complete. The system
will restart automatically after recovery completed.