background image

 

 

Preface 

Preface 

Copyright Notice 

No part of this document may be reproduced, copied, translated, or transmitted in any form or 
by any means, electronic or mechanical, for any purpose, without the prior written permission 
of the original manufacturer. 

Trademark Acknowledgement 

Brand and product names are trademarks or registered trademarks of their respective owners. 

Disclaimer 

We reserve the right to make changes, without notice, to any product, including circuits and/or 
software described or contained in this manual in order to improve design and/or performance. 
We  assume  no  responsibility  or  liability  for  the  use  of  the  described  product(s)  conveys  no 
license or title under any patent, copyright, or masks work rights to these products, and make 
no representations or warranties that these products are free from patent, copyright, or mask 
work  right  infringement,  unless  otherwise  specified.  Applications  that  are  described  in  this 
manual are for illustration purposes only. We make no representation or guarantee  that  such 
application will be suitable for the specified use without further testing or modification. 

Warranty 

Our warranty guarantees that each of its products will be free from material and workmanship 
defects for a period of one year from the invoice date. If the customer discovers a defect, we 
will,  at  his/her  option,  repair  or  replace  the  defective  product  at  no  charge  to  the  customer, 
provide  it  is  returned  during  the  warranty  period  of  one  year,  with  transportation  charges 
prepaid.  The  returned  product  must  be  properly  packaged  in  its  original  packaging  to  obtain 
warranty service. If the serial number and the product shipping data differ by over 30 days, the 
in-warranty service will be made according to the shipping date. In the serial numbers the third 
and fourth two digits give the year of manufacture, and the fifth digit means the month (e. g., 
with  A  for  October,  B  for  November  and  C  for  December).  For  example,  the  serial  number 
1W16Axxxxxxxx means October of year 2016.  

Customer Service

 

We provide  a  service  guide  for  any  problem  by  the  following  steps:  First,  visit  the  website  of 
our  distributor  to  find  the  update  information  about  the  product.  Second,  contact  with  your 
distributor,  sales  representative,  or  our  customer  service  center  for  technical  support  if  you 
need additional assistance. 

You may need the following information ready before you call: 

  Product serial number 

  Description of complete problem 

  The exact wording of any error messages 

In addition, free technical support is available from our engineers every business day. We are 
always  ready  to  give  advice  on  application  requirements  or  specific  information  on  the 
installation and operation of any of our products. 

Содержание PoE Touch Monitor





























Отзывы: